Industrial Cross Linked Polyethylene Wire Class 1 Solid Copper Conductor
APPLICATION
These power cables are used for electricity supply in low voltage installation system. They are well adapted to underground use in industrial applications with an additional mechanical protection. These cables can be fixed on cable trays, within conduits or fixed to walls.
CONSTRUCTION
Conductor
RE: Class 1 solid copper conductor according to BS EN 60228
RM: Class 2 stranded circular or circular compacted conductor according to BS EN 60228
Insulation
XLPE (Cross-Linked Polyethylene)
Bedding
PVC (Polyvinyl Chloride)
Sheath
PVC (Polyvinyl Chlorid)
Standard
IEC 60502-1, BS EN/IEC 60332-1-2, VDE 0276 part 603
The electrical and dimensional properties of this product are measured by the Technical and Quality Assurance department at the Cables laboratory. Cable performance in respect of conductor resistance, construction quality (workmanship), dimensional consistency, and other parameters are verified to published standards and approved product drawings. Conformance to RoHS (Restriction of the use of Hazardous Substances) is determined and confirmed.
CHARACTERISTICS
Voltage Rating (Uo/U)
600/1000V
Temperature Rating
During installation -5°C to +50ºC
Fixed Installation: -20°C to +90°C
Permissible operating temperature at conductor +90°C
(Short circuit temperature: 250ºC)
Minimum Bending Radius
12 x overall diameter
Core Identification
1 core: Black
2 core: Blue Brown
3 core: Brown Black Grey
3 core including earth: Brown Blue Green/Yellow
4 cores: Blue Brown Black Grey
4 core including earth: Green/Yellow Blue Brown
Black
5 cores: Blue Brown Black Grey Black
5 core including earth: Green/Yellow Blue Brown
Black Grey
7 cores and Higher:
Black cores and White numbers + Green/Yellow
Sheath Colour
Black
Product Tags:
|
|
Industrial Cross Linked Polyethylene Wire Class 1 Solid Copper Conductor Images
|
